Automatic Technology Australia ROLL UP GARAGE DOOR OPENER Installation Instructions And Owner's Manual

Advertisement

Quick Links

AUTOMATIC TECHNOLOGY AUSTRALIA PTY LTD
ROLL UP GARAGE DOOR OPENER
Warning: Failure to comply with the
OWNERS COPY
Installation instructions and the
Safety warnings may result in

Installation Instructions

Serious Personal injury and/or Property and
Remote Control Opener damage.
And Owners Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROLL UP GARAGE DOOR OPENER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Automatic Technology Australia ROLL UP GARAGE DOOR OPENER

  • Page 1: Installation Instructions

    AUTOMATIC TECHNOLOGY AUSTRALIA PTY LTD ROLL UP GARAGE DOOR OPENER Warning: Failure to comply with the OWNERS COPY Installation instructions and the Safety warnings may result in Installation Instructions Serious Personal injury and/or Property and Remote Control Opener damage. And Owners Manual...
  • Page 2: Additional Safety

    Automatic Technology Australia Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all conditions or warranties, Statutory or otherwise which may be implied by laws as conditions or warranties of purchase of an Automatic Technology Australia Pty Ltd Roll Up Garage Door Opener...
  • Page 3: Service Indicator

    F E AT U RE S OPEN AND CLOSE DRIVE Your ATA Automatic Garage Door To store any code simply press and BUTTONS Opener has many features which hold the Door Code button on the Another feature developed by you will appreciate. The compo- Opener and press the Transmitter...
  • Page 4: External Receiver

    O PE R AT I NG CO NT RO L S 1. LIGHT CODE button (White) OPEN LIMIT ADJUST EXTERNAL RECEIVER is used for storing or erasing the SCREW (Green) is used to fine INPUT is the input where an transmitter button (code) you wish adjust the open limit stop position.
  • Page 5 O PE R AT I NG CO NT RO L S FORCE MARGIN SET BUTTON CLOSE DRIVE BUTTON (RED) OPEN LIMIT LED (GREEN) DOOR CODE BUTTON (BLUE) OPEN DRIVE BUTTON (GREEN) 10) LIGHT CODE BUTTON O/S/C BUTTON (YELLOW) 11) ENGAGE / DISENGAGE HANDLE RESET BUTTON 12) OPEN LIMIT ADJUST SCREW (GREEN) AUTO CLOSE TIME BUTTON...
  • Page 6 PA C K A G E CO NT E N T S ITEM QUANTITY DRIVE UNIT………………………………………………………………………………………….. CONTROL BOX……………………………………………………………………………………... KEY RING TRANSMITTER PTX-4……………...………………………………………………... (3.1) ALKALINE BATTERY A23 12V……………………………………………………………………. WEIGHT BARS (NOT INCLUDED IN SOME COUNTRIES)………………………………….. WEIGHT BARS ACCESSORY PACK (NOT INCLUDED IN SOME COUNTRIES)………… (5.1) PAN HEAD SCREW M5x40…………………………………………………………………………..
  • Page 7: Side Room Requirements

    S E Q UE N CE O F I NS TAL L AT I O N MINIMUM SIDE ROOM 135mm SIDE ROOM REQUIREMENTS 85mm Figure 1 shows the minimum side room that is required. The distance between the edge of the door curtain and the in- side of the bracket is 85mm, and the distance between the edge of the door curtain and the outside of bracket is 135mm.
  • Page 8: Left Or Right Hand Installation

    FIG. 3 FIG. 3a 3. MOUNTING OF CONTROL BOX Determine the position for the control box on the wall. Con- sidering that it must be: a) out of reach of children, 1.5 mtr above the ground and b) close enough to the drive unit to run the 1.8 mtr connecting wires.
  • Page 9: Installation

    I NS TAL L AT I O N FIG. 6 5. FIXING DRIVE UNIT TO THE DOOR (RIGHT HAND INSTALLATION) The Automatic Openers Drive Unit can be fixed to the Roll Up Garage Door in a variety of ways. Below we will describe one method of fixing.
  • Page 10 I NS TAL L AT I O N FIG. 9 6. FIXING OF DOOR CURTAIN TO DRUM WHEEL The door curtain has to be secured to the drum wheel with suitable fasteners. 1. With the door in the fully closed position mark the curtain (Fig.
  • Page 11 I NS TAL L AT I O N If the door has not reached the desired NOTE: FIG. 12 limit position by more then 30 mm, then it is recommended that the green limits cam be adjusted again before the green fine adjustment screw is adjusted.
  • Page 12 I NS TAL L AT I O N FIG. 14 OPEN LIMIT ADJUSTMENT Press in and hold the Green Open Button (Fig 14) The door should start opening. Release the Green Open but- ton when the door reaches the desired open limit stop position.
  • Page 13: Important Note

    I NA S TAL L AT I O N FIG. 16 8. SETTING OF OPEN AND CLOSE SAFETY OBSTRUCTION FORCE The Safety Obstruction Force is calculated automatically and set in memory on the Automatic Opener. This applies to both   ...
  • Page 14 I NS TAL L AT I O N 8.5 SAFETY OBSTRUCTION TEST FIG. 18 TESTING CLOSE CYCLE 1. Open the door by pressing the Yellow O/S/C button 4 (Fig 18). 2. Place a length of timber 100mm X 50mm on the floor directly under the door (FIG.
  • Page 15 I NS TAL L AT I O N 10. SETTING THE TRANSMITTER TO FIG. 20 OPERATE THE COURTESY LIGHT The Transmitter can be programmed to operate the Courtesy Light on the Door Opener. 1. Press and hold Light Code button 10 on the Control Panel (Fig.
  • Page 16: Setting Auto Close Time

    I NS TAL L AT I O N 13. FITTING OF SAFETY PHOTO FIG. 23 ELECTRIC BEAM (OPTIONAL) Locate the Photo Electric Beam (P.E.) normally closed contact type in a strategic location within doorway. Re- move shunt from P.E connector (Fig.23) and connect the plug from the P.E.
  • Page 17: Factory Set Defaults

    I NS TAL L AT I O N FACTORY SET DEFAULTS. DEFAULT STEP MAXIMUM MAXIMUM MOTOR RUN TIME 30 Sec. COURTESY LIGHT TIME 3 Min. 10 Sec. 10 Min. OBSTRUCTION FORCE MARGIN AUTO CLOSE TIME 0 Sec = Off 5 Sec. 4 Min.
  • Page 18: Spare Parts

    S PA RE PA RT S WHEN ORDERING SPARE PARTS QUOTE THE ORDER CODE NUM- BER TO YOUR LOCAL IN-...
  • Page 19: Technical Specifications

    FA U LT S AN D RE ME DI E S SYMPTOMS POSSIBLE CAUSES REMEDY Door will not operate Main Power not turned on Turn on Mains Power Door is obstructed Remove obstruction Unlock door and Inspect door and remove jam Door in locked or motor jammed Door needs to be re-initialised Fully close the door and press the Reset button...
  • Page 20 * * WA RR A N TY A N D E X C L U SI O N O F L I AB IL I T Y * * Subject to all of the matter set out below, Automatic Technology Australia Pty Ltd (“ATA”) WARRANTS for twenty four months from the date of purchase (specified in the receipt sales docket) that the Garage Door Opener System contained in the accompa- nying packaging (the “Product”) is free of any defects in material and workmanship rendering it unmerchantable.

Table of Contents