The Ninja; Care & Maintenance - Ninja BL660 Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base
is unplugged from the power source before
inserting or removing the blade assembly and
before cleaning.
CAUTION: DO NOT immerse the motor base
into water or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and
wipe dry.
3 Place the pitcher and single serve drink
cup in the dishwasher. Place the lids and
attachments on the top rack. Use caution
when handling the blade assemblies as
the blades are very sharp.
NOTE: You may also wash the containers by
filling ¾ of the container with warm water
and a drop of dish washing detergent, placing
the corresponding lid on the container and
pressing the pulse button a few times. Once
clean, remove the container from the motor
base. Rinse the container, attachment and lid
under running water. Allow all the parts to dry
before storing.
Please call customer service if any servicing
needs to be performed on the appliance at
1-877-646-5288.
11 TOLL FREE:
BL660_30_IB_ENG_111222_1.indd 11
1-877-646-5288
Cord Storage
HOW TO STORE
1 Store the Ninja Professional Blender upright
®
with the pitcher on the motor base, 6-Blade
assembly inside the pitcher and lid on the
pitcher. Do not place anything on top. Store
the single serve cups and the rest of the
attachments along side the appliance or in a
cabinet where they will not be damaged and
won't cause a hazard. Insert the power cord
into the cord storage area located in the back
of he motor base.
RESETTING THE MOTOR THERMOSTAT

The Ninja

Professional Blender features a
®
unique safety system which prevents damage
to the unit's motor and drive system should you
inadvertently overload your appliance. If the
appliance is being overloaded, the motor will stop
and the power light will remain lit and speeds 1, 2
and 3 will flash. To reset the appliance, follow the
resetting procedure below:
1 Unplug the appliance from the electrical
outlet.
2 Remove and empty the container and ensure
that no food is jamming the cutting blades or
attachments.
3 Allow the appliance to cool for approximately
15 minutes.
4 Re-install the container onto the base and re-
plug the appliance into the electrical outlet.
5 Proceed to use the appliance as before
making sure not to exceed the recommended
maximum capacities.
11-12-28 3:46 PM