Nudge Tools; Nudge Resolution; Nudge Arrows; Selection Start (Left) - Mackie HDR24 Editing Manual

Nudge Tools

(Nudge the selection area of the region)
8
HDR 24/96
This tweak tool set allows you to nudge selected regions, areas, or area selection
boundaries. Actions include moving regions, resizing regions, moving or resizing
region attributes (such as start, end or length) in specified time increments.
Multiple regions and region attributes may be selected and modified in the same
manner as single regions. Nudge tools are located on the Tools panel, just to the
right of the Selection Range time displays.

Nudge Resolution

The pulldown menu above the nudge tools selects the increment of one
"nudge" (a small amount of movement) in units of samples, SMPTE frames,
or fractions of a second.

Nudge arrows

The arrows surrounding the three Nudge Selection boxes nudge to the right
or left by the increment selected. What gets moved is determined by which
Nudge Selection box is selected.
Selection Start (left), Selection End (right), Selection (center) boxes
These three boxes select whether the left boundary, right boundary, or the
entire selection or region will be nudged. These are "radio buttons" - only one
may be active at a time. When the Hand tool is selected, the boxes contain a
waveform icon, indicating that a region will be nudged. When the I-Beam tool
is selected, the boxes show a divided block, indicating that a selection will be
nudged.
Selecting the left box causes the left boundary of the selection or region to be
nudged when the left or right arrow is clicked. Similarly, selecting the right
box and clicking on an arrow will nudge the right boundary in the direction of
the arrow. Selecting the center box causes the complete region or selection
area to be nudged when a direction arrow is clicked, without changing its
length.
I-Beam (Area) Nudge Hand Tool (Region) Nudge
(Nudge the region itself).