Table of Contents
Advertisement
How to run a wash cycle
14
START/PAUSE
decide to change the programme, you must cancel the current programme
(see below).
Cancelling the programme
If you want to cancel the programme, turn the programme selector to the
STOP
position.
End of the programme
The washing machine stops automatically ; the START/PAUSE
goes out and "0" flashes on the display. The lid can only be opened around 2
minutes after the washing machine has come to a stop. The LID
lights off.
1.Position the programme dial on the STOP
is switched off.
2.Remove washing.
3.Unplug and close water inlet tap.
4.Check that the drum is in fact empty: if any textiles remain inside, they could
be damaged (shrunk) during the next wash or the colour could run onto other
pieces of laundry.
We recommend leaving the lid and drum open after use to ventilate the water
tank.
Standby mode
If the appliance is on but no commands are selected for 10 min before or after
a cycle, it goes into standby mode. The screen light goes out and START/
PAUSE
flashes slowly.
To exit standby mode, simply press any pushbutton or turn the programme
selector.
button flashes in yellow for several seconds. If you still
pushbutton
position : the washing machine
indicator
Hide quick links:
Advertisement
Table of Contents
