13) Flip the A-COVER in the direction shown.
15) Use the SS-93 to release the UI ASSEMBLY.
17) The UI ASSEMBLY is connected to the PWB with a
flexboard connector.
14
14) Remove the SS-148.
16) Use the dental tool to open the small clips on the
sides of the UI ASSEMBLY.
18) Open the flexboard connector of the UI ASSEMBLY
with the SS-93 and remove the UI ASSEMBLY.
Confidential
Copyright @ 2008 NOKIA. All rights reserved
N79 RM-348 / RM-349 / RM-350
Service Manual Level 1&2
ISSUE 1