Connect To A Wireless Network - ZyXEL Communications G-220 v2 Quick Start Manual

5 Click Finish to restart the computer.
6 Locate an available USB port on the computer.
7 Remove the protective cap
to expose the USB
connector. Insert the G-
220 v2 to an available USB
port on the computer. The
G-220 v2's lights turn on if
it is properly inserted.
Never bend, force or twist the G-220 v2 into the
port.
After you install the ZyXEL utility and insert the G-220 v2, an
icon appears in the system tray (typically at the bottom of the
desktop).
If the icon color is green and/or you see the following icon
on your desktop, you are already connected to a wireless
network.

2 Connect to a Wireless Network

Using WPS
You can use Wi-Fi Protected Setup (WPS) to add your
computer to a wireless network.
ENGLISH
5