Table of Contents
Advertisement
OmniTouch 8600 My Instant Communicator
Mobile Edition
Read before use
So that you can benefit fully from My Instant Communicator, you are strongly advised to
familiarize yourself properly with all the functionalities of your mobile, such as network
connection management, access to the alphanumeric keypad, ring management, and keypad
beep configuration, etc.
Please refer to the "MIC Unified Communication Client Device White List" document to find
out about the Windows Mobile® operating system and which mobile phone models to use
with the My Instant Communicator application. Contact your installation technician if
necessary.
To control the cost of using My Instant Communicator (voice data communication), you are
strongly advised to choose an unlimited internet option from your operator. It is also
important to check whether your operator charges additional rates (voice and data in
particular) when using your mobile abroad.
Using a wired or wireless headset (Bluetooth) while communicating over your mobile will
enable you to fully appreciate the enhanced usability of your My Instant Communicator
application.
The My Instant Communicator interface is designed to be used in "on-the-move" situations:
exiting a plane, quick view between meetings, etc. The application is built on the "one
click, one action" principle. It is therefore easy to use, and all actions, whether viewing
messages or calling someone back, are one click away.
The touch screen on your mobile means it is simple to use My Instant Communicator. If your
mobile has a browser and an "OK" key, you can use it to access the application's main
functions.
My Instant Communicator uses the data channel (WiFi or 3G/3G+) to set up a call with your
company's telephone system. When the call is set up, calls are processed by the company.
There is no additional cost for your mobile. If it is impossible to connect to the data
channel, the application will run in telephone mode, so the calls will transit over the GSM
network. The cost of a call will be the same as for a call to your company. Not all features
will be available.
Use of your operator's 3G/3G+ network: if no WiFi network can be accessed, the My Instant
Communicator application will use your operator's 3G/3G+ network. If 3G cover is not
homogenous, 3G/GSM switchover may affect the behavior of the application.
8AL 90820 AAAB
April 2010 -
ed 01
Page 4
Advertisement
Table of Contents
