Using The Appliance - Philips HI575 User Manual

ENGLISH
10
- Silk, woollen and synthetic materials: iron the reverse side of the
fabric to prevent shiny patches.
- Velvet and other fabrics that tend to acquire shiny patches should be
ironed in one direction only (along with the nap) while applying very
little pressure.
- Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic fibres.

Using the appliance

Corded ironing
C
Set the mode switch to position ª (corded ironing).
1
C
2 Take the iron from the stand.
◗ When you stop ironing for a while, you can put the iron on the
stand or on its heel.
Cordless ironing
C
Set the mode switch to position ∫ (cordless ironing).
1
C
2 Take the iron from the stand.
3 HI575 only: put the iron back on the stand when the
temperature light starts blinking.This indicates that the iron
has cooled down below the set temperature.
◗ When you stop ironing for a while, always put the iron on the
stand to allow it to heat up again.