NOTE
The maximum number of user connections is one. This
means that you cannot access the web server while someone
else is occupying it.
9.4 Accessing the FTP server
To Access to the FTP server, set the Installation > Network Set-
ting > FTP Server option to Enable.
Select the Installation > Network Setting > User Info menu.
At this time, you have to enter Personal Identification Num-
ber (PIN). Then set the User ID and Password options as you
desire. And select OK to save the settings. When you access
to the FTP server, you will be asked for the account that was
made with these options.
NOTE
You can access the FTP server with an anonymous account.
However, with an anonymous account you can only down-
load files. You cannot upload files.
You need an FTP client program to access the FTP server of the
digital receiver.
9.4 Accessing the FTP server 105
9