Table of Contents
Advertisement
Quick Links
CONTENTS
1) Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 2
2) Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
3) General description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4) Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5) Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6) Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7) Installation and wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
8) Operation of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
9) Warnings regarding operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10) Safety devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
11) Warnings regarding safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
12) Noise levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
13) Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
14) Cleaning the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ENGLISH
1
Advertisement
Table of Contents
Related Manuals for La Marzocco SUPER JOLLY
Summary of Contents for La Marzocco SUPER JOLLY
-
Page 1: Table Of Contents
ENGLISH CONTENTS 1) Foreword ..........page 2 2) Dimensions . -
Page 2: Foreword
Look after this manual and keep it in a safe place. The manufacturer reserves the right to make changes to the product and to the manual. 2) DIMENSIONS Ø Ø SUPER JOLLY MAJOR GRINDER-DOSER GRINDER-DOSER inches inches Ø... -
Page 3: General Description
ENGLISH 3) GENERAL DESCRIPTION SUPER JOLLY MAJOR - KONY ROBUR - ROYAL - STARK HOPPER COVER HOPPER (coffee bean container) GRINDING ADJUSTMENT DISK HANDLE LOCKING SLIDE HOPPER SAFETY SCREW HOPPER FIXING PIN COFFEE GRINDING ADJUSTMENT DISK PUSH BUTTON PANEL FUNNEL (DOSER) -
Page 4: Use
6) USE This appliance has been designed solely for grinding coffee beans.Any other use is understood to be improper, and consequently hazardous.The manufacturer cannot be held responsible for any damage as a result of improper or incorrect use. Do not use the appliance for grinding other types of food, or anything else. THE COFFEE GRINDERS AND COFFEE GRINDER-DOSERS MANUFACTURED BY OUR COMPANY ARE INTENDED FOR SKILLED PERSONNEL ONLY FOR PROFESSIONAL USE AND NOT FOR HOUSEHOLD USE.The user must be... -
Page 5: Operation Of The Appliance
8) OPERATION OF THE APPLIANCE PRELIMINARIES Verify that the hopper is correctly MAJOR - KONY SUPER JOLLY placed on the appliance and fixed ROBUR - ROYAL - STARK to the casing with the appropriate linchpin placed on the collar or to... - Page 6 ADJUSTING GRINDING In order to achieve finer or coarser grinding, the adjustment disk located under the hop- per must be adjusted using the relevant handle. In order to increase the coarseness of the ground coffee, the disk must be rotated clock- wise;...
- Page 7 ENGLISH Select the dose you wish to adjust : either the single dose (indicating one cup) or the double dose (indicating two cups).The display will show the grinding time (in seconds) of the selected dose. By pressing the push buttons “+” and “-“ the grind- ing time can be increased or decreased and consequently the selected dose can be increased or decreased.
-
Page 8: Warnings Regarding Operation
9) WARNINGS REGARDING OPERATION • OPERATING RANGE OF THE MOTOR IN THE VERSIONS WITH SINGLE-PHASE MOTORS, OBSERVE THE DUTY CYCLE ON / OFF STATED IN THE LABEL LOCATED ON THE LEFT SIDE OF THE APPLI- ANCE. E.g.: a data on the label 20s ON / 30s OFF point out an allowed duty cicle of 20 sec- onds switched on and 30 seconds switched off. -
Page 9: Warnings Regarding Safety
• SAFETY SCREWS (SUPER JOLLY) hopper must always be attached to the upper grinding... -
Page 10: Noise Levels
HOPPER WITHOUT FIRST UNPLUGGING THE APPLIANCE FROM THE MAINS. • Take care, as the grinding blades may continue rotating for a short while even after the appliance is switched off. • THE USER IS NOT AUTHORIZED TO REMOVE SCREWS OR ANY PARTS SCREWED ONTO THE APPLIANCE. -
Page 11: Maintenance
ENGLISH USA & CANADA: The noise level of our appliances is included within the limits stated in U.S. reg- ulation 29 CFR 1910.95 (‘Occupatinal Health and Environment Control - Occupational noise exposure’) for eight hours continuosly in a day. Said noise level has been determined on identical news appliances. 13) MAINTENANCE It is essential to check the state of the supply cable and plug periodically. - Page 12 It is advisable to regularly clean the hopper. After cleaning operations, the hopper must be correctly fixed to the appliance with the appropriate linchpin or appropriate screw. Grinding system After having removed the safety screw, if the appliance is fitted with one, pre- venting removal of the grinding adjustment ring, remove the ring by rotating it clockwise.