Viking MSB-30/EWP Product Manual

Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Add Two-Way Voice Communication
to Your Existing IP Network Camera
It is common for IP based network cameras to have two-
way audio connections. When this is the case, the MSB-
30 can be added to turn your IP network camera into a
VoIP (Voice over Internet Protocol) video phone, allowing
both voice and video to stream over the internet. If the
camera already has a tiny speaker and microphone, the
MSB-30 can be added to get better and louder sounding
audio by using the audio input and output connections
provided by the camera. The MSB-30 has a microphone,
a speaker, and a momentary push button housed in a
stainless steel flush mount panel. An optional Viking
model VE-5x5 can be used to surface mount the unit to a
wall or pedestal.
The MSB-30 line level audio input and output connections
can be directly connected to the IP camera's line level
audio output and input connections for two-way voice
communications. A built-in 2 watt amplifier powers the in-
ternal speaker, and there are volume controls to adjust
both the speaker volume and microphone sensitivity. The
2 watt amplifier can be used to power an auxiliary speaker
for even greater volume and coverage.
The MSB-30 also has a momentary "CALL" button switch
which can provide a momentary contact closure to trigger
the IP network camera, or ring a door bell. The front panel
blue LED lights continuously to show the unit is powered,
and to help identify the "CALL" button location at night. An
Features
• Vandal Resistant Features: 14 gauge louvered 316
stainless steel faceplate with permanent laser etched
graphics, speaker/mic screen, heavy duty metal "Call"
button and hex drive mounting screws
• Weather Resistant Features: Marine grade 316
stainless steel faceplate, screws and push button
switch. Switch internally sealed per IP67. Mylar
speaker. Self-draining mic mount. Faceplate, mic and
speaker gaskets. Weather resistant powder paint on
optional VE-5x5 (DOD# 424).
• Volume adjustments for microphone and speaker
• Two watt amplifier to drive speaker
• Power supply included
• Blue LED indicator
• Extended temperature range (-15°F to 130°F)
• Optional VE-5x5 surface mount back box (DOD# 424)
• Optional MSB-30-EWP is designed to meet IP66
Ingress Protection Rating (see DOD# 859 for more in-
formation)
PRODUCT MANUAL
external contact closure can be used to turn off the blue
LED, or simply wire it in parallel with the momentary "Call"
button switch to make the blue LED wink off when the but-
ton is pressed.
The MSB-30-EWP adds Enhanced Weather Protection
(EWP). Use for outdoor installations where the unit is ex-
posed to precipitation or condensation. EWP products fea-
ture foam rubber gaskets and boots, sealed connections,
gel-filled butt connectors, as well as urethane or thermal
plastic potted circuit boards with internally sealed, field-
adjustable trim pots. For more info, see DOD# 859.
Applications
Use with IP camera to add video and two-way voice
communications for:
• Business entrances
• Residential entrances
• Pedestrian gates
• ATM machines
• Parking lots/ramps
www.vikingelectronics.com
Information: (715) 386-8861
Specifications
Power: 120V AC/13.8V AC UL listed adapter provided
Dimensions: Overall: 127mm x 127mm x 57mm (5" x 5"
x 2.25"), Plastic Electrical Box: 102mm x 102mm x 54mm
(4" x 4" x 2.12")
Shipping Weight: 1.5 Kg (3.3 lbs)
Operating Temperature: -26°C to 54°C (-15°F to 130°F)
Humidity – MSB-30: 5% to 95% non-condensing
Humidity – MSB-30-EWP: Up to 100% condensing
Connections: Gel-filled butt connectors
MSB-30/EWP
Mic/Speaker/Button
Panel for IP Cameras
April 3, 2014