1. By installing this product on a VGA (Video Graphics Array) card, a PCI slot adjacent to the PCIe (or AGP) slot will become unusable. 2. If this product is to be installed on a recently released VGA card, please check for compatibility at Zalman s website first.
Installation Procedure The following installation sequence MUST be followed. (1. VGA RAM Heatsink Attachment 2. Thermal Grease Application 3. Nipple Installation on Retention Guide 4. VGA Cooler Installation 5. Spring Insertion on the Fixing Nut 6. Fixing Nut Assembly on VGA Cooler s Nipple 7.
Page 5
4. VGA Cooler Installation Insert the Rubber Rings into the VGA Cooler s Nipples. Install the Nipple-attached VGA Cooler on the VGA card s Mounting Holes. The VGA Chipset MUST be positioned on the center of the VGA Cooler s base. Simultaneously hold the VGA Cooler and the VGA card with one hand, then flip the VGA card so that its rear- side is facing upwards.
Performance can be increased by adjusting the RPM control knob of the FAN MATE 2. Note) FAN MATE 2 has been specifically designed for the fan of this product. Zalman Tech Co., Ltd. is not responsible for any damage to systems or VGA Chipsets caused by using it with other types of fans.
Page 7
Zalman Computer Noise Prevention Systems When building a noiseless computer, use Zalman s Ultra Quiet CPU Cooler, Noiseless Power Supply, Heatpipe HDD Cooler, Fanless Northbridge Cooler and Noiseless Case Fan for more stable performance and a noiseless environment. Noiseless Power Supply...
Need help?
Do you have a question about the Extreme Gaming VGA Cooler GV1000 and is the answer not in the manual?
Questions and answers