Table of Contents
Advertisement
THEATER MENU
SEL
SETUP
SPECIAL
VIDEO
Theater Modes
Surround
Menu
To Menu Bar
THEATER MODES
Press MENU and then the RIGHT/LEFT arrow button to
access the Theater menu. Press DOWN arrow button to
access the Theater Modes or Surround. To change
Theater Modes, press RIGHT arrow button to choose
Theater Modes.
Use the UP/DOWN arrow buttons to choose which mode
you prefer. Each is a preset setup designed to enhance
your viewing experience. Use the UP/DOWN arrow to
choose Reset (Reset restores the levels to their original
settings). Press SELECT to confirm your choice.
SURROUND
To activate SRS® or BBE®, choose the Surround option,
then choose SRS and/or BBE. Turn them on or off
depending on your preference. Press SELECT to set and
confirm your choice(s). Press QUIT to save and exit.
SRS retrieves the spatial information from any stereo
recording and restores the original three-dimensional
sound field. As a result, the reproduced sound is much
closer to that of a live performance. BBE improves the
sound from all audio sources, providing a more
complete high-definition reproduction of the original
performance.
SRS and the symbol are trademarks of SRS labs, Inc.
SRS technology is incorporated under license from SRS
Labs, Inc.® Licensed by BBE Sound, Inc. under
USP4638258 and 4482866. BBE and the symbol are
registered trademarks of BBE Sound, Inc.
PV154 - 923-03506
USER MENUS
AUDIO
THEATER
TV
Movies
Music
Sports
Reset
To Exit
Quit
POP-3
Main Picture
POP-3 (Picture-On-Picture) shows multiple channels on
the screen. With the TV on and Ant 1 source shown on-
screen, press MULTI on the remote to turn on the POP-3
feature. POP-3 shows three additional channels on the
right side of the screen. The multi-channel display also
includes the channel number for reference. POP-3 will
continue to display all the channels continuously, three
channels at-a-time.
Press MULTI again to turn POP-3 off. POP-3 is only
available on Antenna/Cable 1 source. Closed Captioning
will not appear if POP-3 is active.
SPLIT SCREEN
Original Channel
Split Screen shows two live tunable channels on the
screen at the same time. With the TV on and Ant 1 source
shown on-screen, press SPLIT on the remote to turn on
the Split Screen two-channel viewing feature.
Press PIP CH to switch channel tuning to the additional
channel. Tune to a channel for the additional channel
picture. Press PIP CH to switch channel tuning back to
the original channel. Press SPLIT again to turn the feature
off and return to one channel viewing. Split Screen is
only available on Antenna/Cable 1 source.
1-17
10
11
12
POP-3 Channels
Additional Channel
ZP26/28 - MENUS
Advertisement
Table of Contents
