Table of Contents
Advertisement
Upgrades
Expansion Card Installation
The Rack Mount Computer can accommodate up to 3 PCI expansion cards, 2
ISA expansion cards and one PICMG expansion card. To install an expansion
card:
MAN-RCKPC-001
CAUTION: Before opening the Computer or handling any expan-
sion cards, be sure to protect the equipment from electrostatic
discharge (ESD) by properly grounding yourself.
1.
Disconnect the power source from the Rack Mount Computer.
2.
Open the enclosure to install the expansion cards, by removing the
two thumb screws at the top of the rear panel that secure the housing
cover. Lift the housing cover off of the chassis.
Retainer Foot Screw
Card Retainer Rail
Card Retainer Rail Screw
3.
Remove the screw that secures one end of the card retainer rail and
lift up. (The rail is hinged on the other end.)
4.
Remove and set aside the screw that secures the slot cover where
the expansion card will be installed. Remove and discard cover.
MC100 Series Rack Mount Computer
7 MAINTENANCE AND UPGRADES
Hinged End
Card Retainer Foot
Slot Cover
Screw (7)
17
Advertisement
Table of Contents
