Table of Contents
Advertisement
2.
TTY+Talk: Users who can talk, but cannot hear, may use this setting to speak through
the phone and receive responses via text message
3.
TTY+Hear: Users who can hear, but cannot speak, may use this setting to listen to
conversation of the other party, and respond via text message.
4.
TTY Off: Users who can hear and speak may use this setting to disable TTY support.
Connecting to TTY Equipment
1.
Connect the cable from the TTY device into the ZTE TTY-to-USB connector.
2.
Plug the USB connector into the jack on the right side of the phone.
3.
Enter the TTY Mode menu and select the desired TTY Mode (shown above).
4.
After setting the TTY mode, check the LCD screen on the phone for the TTY icon
5.
Connect the TTY equipment to the power source and turn it on.
6.
Make a phone connection to the desired number.
7.
When a connection is made, use the TTY equipment to send a text message, or speak
(for TTY+Talk mode).
8.
The voice or text message from the other party will heard or displayed on the TTY
equipment, depending on the TTY mode selected.
PC Connection
The PC Connection setting allows you to select the data port for when the handset is used
as a modem for internet connections. You can access the PC Connection settings menu by
selecting Menu→Settings→Others→PC connection from standby mode. Use the Up and
Down keys to select between USB and Bluetooth.
Memory Info
The Memory Info menu allows you to view information about the phones available and used
memory.
84
Advertisement
Table of Contents
