Zte Director Programming Instructions

Programming Instructions for the ZTE Director

Manual Programming Instructions

1. From the keypad dial ##DATA# (##3282#)
2. Enter SPC code (000000)
3. Select NAM from the menu
4. Select edit
5. Enter new MDN/MSID
6. Click menu key to invoke option to Save or Cancel.
7. Click Save
8. Exit the menu by pressing return key until return to the idle screen.
9. Repeat steps 1, 2 and 3 to re-enter NAM menu
10. Select view to make sure new MDN/MSID are entered correctly
Data Clearing Instructions for the ZTE Director
1. Select Applications
2. Select Settings
3. Select Backup and reset
4. Select Factory Data Reset
5. Select Reset
Hard Reset Instructions for the ZTE Director
1. Hold the volume up key then the power key, hold both for ten seconds until
the boot screen appears
2. Use the volume keys to highlight "wipe data/factory reset"
3. Push pwr button
4. On the next screen use volume keys to highlight "yes- delete all data", then
press power
5. When reboot appears, press power
Data Transfer Instructions for the ZTE Director
1. Connect source device
2. Select Source Vendor
3. Select Source Model
4. Select Source memory options (phonebook, content)
5. Select Target Vendor: ZTE CDMA
6. Select Target Model: N860 Warp
7. Select Target memory options (phonebook, content)
8. Press (>) to start transfer
9. Follow prompt to enable "USB Debugging" and "Stay Awake" options if