Program - Teclumen Fusion color 36 plus User Manual

Fusion colour 36 plus
Description of the main menu
To scroll the items of this menu use 'UP' and 'DOWN' keys.
Visualizzation
Addr
Mode
StdA Stand alone functioning
Dmxo Automatic functioning with DMX out
Hi-p
Smoo
Fan
Temp Projector temperature
Maxt Maximum projector temperature
Unit
Calr
Calg
Calb
Def Set all the values to default
Vers
Sern
PASS
Cod. 7136694005 – Cod. 7136494005 (IP44) v 1.1 IT/EN
Option
DMX addressing
Setting of DMX mode
Boost of LED power
Dimming mode
Fan settings
Unit of measurement
Red calibration
Green calibration
Blue calibration
Software version
Serial number
Press 'ENTER' to display the current DMX address. Use 'UP and 'DOWN'
keys to change value and press 'ENTER' to confirm or 'ESC' to cancel.
Press 'ENTER', the display will show the current DMX mode. Using 'UP and
'DOWN' keys, change the DMX mode and then press 'ENTER' to confirm.
To see all possible settings, see the 'DMX description'.
Press 'ENTER' to set the projector in stand alone mode. Press 'UP' and
'DOWN' to select the fixed colour (c) or the program (p) to play. N.B.
There is no DMX output. Press 'ESC' to stop this function.
Press 'ENTER' to set the projector in stand alone mode. Press 'UP' and
'DOWN' to select the fixed colour (c) or the program (p) to play. N.B.
There is DMX output to control other projectors on dmx line. Press 'ESC' to
stop this function.
Press 'ENTER' to display the current state of 'Hi-p' function. If it is 'off', the
supply of LEDS is 700 mA, if it is 'on' supply of LEDS is 820 mA
Press 'ENTER' to display the current dimming mode. Change the value
using the 'UP or 'DOWN' keys then press 'ENTER' to confirm. If the value
is 'off', the dimming will be quick and nervous. If the value is 'on', the
dimming will be smooth.
On this model there is no effect.
Press 'ENTER' to display the current projector temperature. Press 'ESC' to
exit.
Press 'ENTER' to display the maximum projector temperature from the last
time it was turned on. Press 'ESC' to exit.
Press ' ENTER' to display the current unit of measurement for the
temperature. The values can be 'cels' (Celsius) or 'fahr' (Fahrenheit). Press
'UP' or 'DOWN' to change the value and press 'ENTER' to confirm or 'ESC'
to exit.
Press 'ENTER', set the maximum level for Red using 'UP' and 'DOWN' .
Press 'ENTER' to confirm and 'ESC' to exit.
Press 'ENTER', set the maximum level for Green using 'UP' and 'DOWN' .
Press 'ENTER' to confirm and 'ESC' to exit.
Press 'ENTER', set the maximum level for Blue using 'UP' and 'DOWN' .
Press 'ENTER' to confirm and 'ESC' to exit.
Press 'ENTER', select 'reset' using 'UP and 'DOWN' to reset to default all
values. Press 'ENTER' to confirm and 'ESC' to exit.
Press 'ENTER' to display the firmware version of the projector. Press 'ESC'
to exit.
Press 'ENTER' to display the serial number of the projector. Press 'ESC' to
exit.
Pagina 9
Description
EN