Configure A Static Ip Address - Snom ONE mini Quick Start Manual

2. Click the Settings tab, then click License.
3. Click Accept.

Configure a Static IP Address

The snom ONE mini is a server in your network, so it is best to configure the device with
a static IP address so you'll always know the IP address. While in administrator mode:
1. Click the System/IP Setup tab.
2. Click No on the DHCP setting.
3. Enter the IPv4 configuration, then click Save.
4. Reboot the system to apply this change.
Note: You can reboot the system from the web interface from the configuration
screen (Schedule Reboot) or by power-cycling the device.
Page 7
© 2012 snom technology, Inc.