Snom ONE mini Quick Start Manual page 5

2. Connect the other end of the Ethernet cable into the network. Following are
a couple of common scenarios.
Power
4
3
2
1
t
Etherne
Reset
3. Optional: If you are NOT using PoE, connect the power adapter to a power
outlet (A). Then connect the other end to the power port on the unit (B).
4. Confirm that the green LED on the face of the unit is lit. This indicates con-
nectivity to the network.
Important!
before calling technical support!
A
B
Please read the configuration instructions on Page 4
Page 5
Power
© 2012 snom technology, Inc.