Setting The Heating Mode - Kambrook KMH100 Instruction Booklet

Setting The Heating Mode

To activate the heater, turn the heat
setting dial clockwise to the LOW or HI
setting. The heater will start operating
on the selected heat setting and
the red power indicator light will
illuminate. Use the heat setting dial to
select the desired heat setting.
LOW – Low heat setting (1000 watts)
HI – High heat setting (1500 watts)
Turn the heat setting dial to the OFF
position to stop the heater operating.
NOTE: This heater features a
tip-over switch. If the heater tips
over, it will automatically switch
off. Once placed back into the
upright position, the heater will
resume operation.
NOTE: You may notice a faint
smell and light crackle sound
when using the mica heater for
the first time. This is normal and
nothing to worry about. Continue
running the mica heater, the
smell will dissipates.
KMH100_IB_A11_FA.indd 11
Setting The Variable
Thermostat
The variable THERMOSTAT can be used
to maintain your desired temperature.
Turn the variable THERMOSTAT dial to
the MAX setting. Once a comfortable
room temperature has been reached,
slowly turn the variable THERMOSTAT
dial anti-clockwise until a click sound
is heard.
Fig. 9
At this setting your heater will
automatically cycle on and off
to maintain the desired room
temperature.
To adjust the set temperature turn the
variable THERMOSTAT dial clockwise
to increase the desired temperature
and anti-clockwise to decrease the
desired temperature.
Fig. 10
11
14/09/11 1:58 PM