Converting From Standard Seat Frame To Van Seat Or Vice Versa; Removing/Installing Seat Pan - Invacare Arrow RWD Service Manual

SEAT FRAME
CONVERTING FROM STANDARD SEAT FRAME TO VAN
SEAT OR VICE VERSA
1. Perform the instructions outlined in PREPARATION FOR REMOVING/INSTALLING
SEAT FRAME (STANDARD FRAME, ADJUSTABLE FRAME, AND VAN SEAT) in this
section of the manual.
2. Perform one (1) of the following:
A. Remove the standard seat frame subassembly. Refer to REMOVING/INSTALLING
STANDARD SEAT FRAME SUBASSEMBLY in this section of the manual.
B. Remove the van seat Assembly. Refer to INSTALLING/REMOVING VAN SEAT
ASSEMBLY in this section of the manual.
3. Perform one (1) of the following:
A. Install the van seat. Refer to INSTALLING/REMOVING VAN SEAT ASSEMBLY in
this section of the manual.
B. Install the standard seat frame. Refer to REMOVING/INSTALLING STANDARD
SEAT FRAME SUBASSEMBLY in this section of the manual.
4. STANDARD FRAMES ONLY ON 12 TO 15-INCH SEAT DEPTHS ONLY:
Install the CJ back brackets from the onto the ASBA. Refer to REMOVING/INSTALLING
CJ BACK BRACKETS in SECTION 8 of this manual.
5. Perform the instructions outlined in PREPARATION FOR REMOVING/INSTALLING
SEAT FRAME (STANDARD FRAME, ASBA, AND VAN SEAT) in this section of the
manual.
6. Adjust the van seat to the desired position. Refer to ADJUSTING VAN SEAT in
SECTION 6 of the Owner's Manual, part number 1104782 or 1123757.
REMOVING/INSTALLING SEAT PAN (FIGURE 9)
REMOVING
1. Remove the seat cushion from the seat pan.
2. Remove the flip-back armrests from the wheelchair. Refer to INSTALLING/REMOVING
FLIP BACK ARMRESTS in SECTION 4 of the Owner's Manual, part number 1104782 or
1123757.
3. Remove the six (6) mounting screws, locknuts, and spacers that secure the seat pan,
seat positioning strap, and quick release pin to the seat frame.
NOTE: When removing seat pan, note tab position of quick release pin to the seat positioning strap.
Part No. 1104849
43
3G Storm Series
SECTION 6
Wheelchairs
®