Daikin BRC1D517 Operation Manual page 12

The button is used to exit browsing at once
(without having to scroll through all programmed
actions).
Press the button to enter the browse mode, the
icon appears, will blink.
NOTE Browsing always starts on Monday and
ends on Sunday.
Check the
programmed for Monday,
The clock indicates the time when the programmed
action is scheduled, either
is being displayed.
NOTE The temperatures mentioned above are
for clarifying purposes only, temperature
values on your controller may vary.
If does not appear, it indicates that there are no
programmed actions for Monday.
Press the button again to go to the next day of
the week. will blink, this indicates that the
programmed actions for Tuesday are being browsed.
The process described above is now restarted.
If at least 1 action is programmed for Tuesday,
appear. The clock indicates the time when the
programmed action will be enabled, either
or and
If does not appear, it indicates that there are no
programmed actions for Tuesday.
Press the button to display the next programmed
action. If a second action is programmed for Tuesday,
will still be blinking and
Assuming that 5 actions were programmed for
Tuesday, a total of 5 presses will be required to
display all programmed actions.
Operation manual
9
icon. If at least 1 action is
will appear.
, or
is being displayed.
will appear.
Continue pressing the
week indicator displays the current day (not blinking),
you have now quit browsing.
NOTE
The number of times that the
will have to be pressed to quit browsing
depends on the number of programmed
actions in the schedule timer.
How do I interpret the programmed
actions
To be able to understand the behaviour of your
installation when the schedule timer is enabled, it is
and
important to look at all programmed actions for the
current day and maybe the last programmed action of
yesterday.
If the first programmed action for today is not active
yet, the current status of your installation depends,
most probably but not necessarily, on the last
programmed action from yesterday. Read the
important note below.
If the first programmed action for today is already
active, the current status of your installation depends,
most probably but not necessarily, on the parameters
programmed in the first programmed action for today.
Read the important note below.
will
NOTE To keep the operation of your installation
simple, the schedule timer settings can
,
easily be overruled by altering the current
setting
previous command until next scheduled
command).
Conclusion: Although
might have
programmed action will overrule the altered settings
and all settings return as programmed.
button until the day of the
("last command"
is displayed, somebody
altered the settings.
Remote controller
4PW15196-1A
button
overrules
The next
BRC1D517