Sd/Mmc Operation; Automatic Memory Storing& Program Scanning; Station Storing; Usb Play Operation - Power Acoustik PL-10A Owner's Manual

OPERATION

AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AS/PS button (14) for several
seconds, the radio searches from the
current frequency and checks the
signal strength until one cycle search
is finished. And then 6 strongest
stations are
corresponding preset number button.
- Program scanning
Press AS/PS button (14) shortly to
scan preset station. The radio is
holding at that preset number for
several seconds with release mute,
then searches again.


STATION STORING

To receive a station, Press one of the
preset button(1~6) for 2 seconds. The
current station is stored into the number
button.

USB PLAY OPERATION

On the front panel of the unit, there is an
USB interface (10). You can connect an
USB driver through this interface (10).
When you connect an USB driver through
the interface, the unit will search the MP3
files or WMA files in the USB driver and
start to play MP3 or WMA files
automatically. If in other mode, you can
also press MODE button (2) to select USB
mode.
It supports the MP3/WMA file in the device.
The operation please refer to the following
instruction.
SELECTING SONGS IN SINGLE STEP
Press button (13) or
to move to the following song or the
previous song. Track number shows on
display.

SELECTING DIRECTORY UP/DOWN

stored into the
button (16)
Press 5 DIR-button (11) or 6 DIR+ button
(12) to select previous directory or next
directory.

PAUSING PLAYING

Press 1 button (18) to pause playing.
Press it again to resume playing.
PREVIEWING ALL FILES
Press 2 INT button (17) to INTRO each file.
Press again to stop intro and start to play.
REPEATING PLAYING
Press 3 RPT button (6) to continuously
repeat the same file. Press it again to
repeat all files.
PLAYING IN RANDOM ORDER
Shortly press 4 RDM button (5) to play all
files in random order. Press it again to
cancel the function.

SD/MMC OPERATION

There is a SD/MMC interface (20) on the
front panel of the unit.
When you insert a SD/MMC card in the
SD/MMC interface, the unit will search the
MP3 files or WMA files in the card and start
to play automatically. The operation is the
same with the USB play operation
described above.
If in other mode, you can also press MODE
button (1) to select SD/MMC mode.
CAUTION：
When there are important files in the USB
Device or SD card, do not connect it to the
main unit to play, because any wrong
operation may cause files loss. And our
company assumes no responsibility for this.
10