Table of Contents
Advertisement
VM8514
•
Some mobile phones (like Sony Ericsson) may have a "Power Saving
Mode" option. PLEASE DO NOT use the power saving mode with the
VM8514.
•
Before accepting or making a call, make sure your mobile phone's
"Bluetooth function" is turned on.
•
To ensure the best conversation quality/performance, stay within one
meter of the BTM15 when talking.
•
Phone Book direct searching through the head unit is only available
if the mobile phone supports Phone Book Download. If the feature is
not supported, the head unit will display "Phone book not provided by this
phone" when an attempt is made to download a phone book.
Hands Free Profile (HFP)
To use a phone wirelessly with this unit, it is necessary to first establish a
connection using Bluetooth wireless technology. Connection is normally
established using HFP (Hands Free Profile), which gives you full control of
functions available on the telephone source. However, depending on your
phone, the connection may be made using HSP (Head Set Profile), making
some functions unavailable. This is a limitation of your phone, not the VM8514.
Since there are a number of Bluetooth mobile phone implementations
available on the market, operations with your Bluetooth mobile phone using
this unit vary greatly.
Please refer to the instruction manual that came with your Bluetooth mobile
phone along with this manual while operating your phone with this unit.
Pairing the Bluetooth System with Your Mobile
Phone and Head Unit
1.
Press the SRC button on the front panel (6) or remote control (14) and
select SOURCE
»
BT.
2.
Press the 2/1NT button (9) to initiate the pairing process. Keep the mobile
phone within 2 meters of the head unit when pairing. (To terminate the
pairing process, press the INT button again.)
3.
Select the Bluetooth setup option on the mobile phone to be paired
(please refer to the phone's instruction manual to learn how to enter
Bluetooth setup, turn Bluetooth on/off, and perform pairing).
NOTE: Some phones require a "pass key" or pairing code to connect. If
your phone requires
a
pass key or pairing code, you will need to enter
this number in the Pairing Code field under the Bluetooth SETUP menu.
The default pairing code for many phones is "0000". The default code for
the VM8514 is "1234". See "Set Pin Code "
on
page 40 for instructions
on
entering
a
new pin code.
32
Advertisement
Table of Contents
