Location And Mounting; Routing Wires - Jensen A400HLX Installation And Operation Manual

®

Location and Mounting

The A400HLX/A600HLX amplifier's compact
design allows greater flexibility in mounting. It
can be mounted under a seat or in the trunk.
When selecting a location, remember that
amplifiers generate heat. Select a location
where air can circulate around the amplifier.
Do not cover the amplifier with carpets or
enclose it behind interior trim panels. Do not
mount the amplifier in an inverted or upside
down configuration. Every installation will be
a bit different based upon vehicle design.
Check all locations and placements carefully
before making any cuts or connections.
Important
Allow air circulation around the amplifier.
4
REC002_A4n600HLX_E 4
A400HLX, A600HLX

Routing Wires

Battery
Fuse or
Circuit
Breaker
Receiver
Power Antenna
RCA Cables
Turn-on Wire
(18 gauge wire)
Speakers
Amplifier
Ground Screw
Drill 1/8" hole in
chassis sheet metal
Use the same ground if
using multiple amplifiers
Important
If wiring connections are made wrong, the unit
will not operate properly and it could be
damaged. Follow the installation instructions
carefully, or have the installation handled by
an experienced technician.
1/9/02, 4:13 PM
Battery
Connector
Grommet
To prevent
damage to
power wire
Power Wire
(8 gauge
wire or
larger)