Samsung 8+ series User Manual page 20

• Performing the pairing process
Turn the TV on and let it power up completely. Press and hold the Power button on the glasses. The green and the
red LEDs blink alternately for 2 seconds.
• Operating range
Recommended pairing distance
Recommended viewing distance
Recommended viewing distance
Recommended pairing distance
Once the 3D glasses are paired, the remaining battery capacity is displayed on the TV screen. (This feature only
✎
applies to Samsung F series 3D TVs and 3D glasses that have been available since 2013.)
If you keep trying to pair the glasses and the TV, the battery level will decrease significantly. However, the battery
✎
level will recover to a certain degree in about a minute.
The working distance depends on the existence of obstacles (a person, metal, walls, etc.) between the glasses
✎
and the TV and the strength of the Bluetooth signal.
Turn off the 3D glasses while they are not in use. If you leave the 3D glasses on, the battery lifespan decreases.
✎
Pairing steps
1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.
2. Press the power button on the 3D glasses briefly. The 3D glasses will power on and pairing will start.
3. The message "3D glasses are connected to TV." will be displayed on the TV screen when the pairing is successfully
completed.
• If pairing fails, the 3D glasses will power off.
• If the first attempt to pair fails, power the TV off and on again and perform step 2.
• How to pair again: Press the power button on the 3D glasses for more than 1 second.
Pairing is needed again in the following situations:
• If the 3D glasses do not function, even when the power button is pressed, especially with a 3D TV after a
repair.
• If you want to play 3D content on another Samsung 3D TV model that belongs to the D, E, or F series released
in 2011 through 2013. You must pair the glasses with the other TV.
50 cm
2~6m
2~6m (6.5 to 19.5 ft)
50 cm or less (19.5 in)
English - 20