JVC DLA-RS4800 Instructions Manual page 52

3
Adjustments and settings in the menu (continued)
Gradation at the
selected point.
[2] Input Signal
Use this function to set the appropriate specifications for the video image
signals input from HDMI and COMP.. Set the aspect ratio and screen mask.
Use the UP and DOWN keys to select items. Press the [BACK] key to return
to the previous screen.
(*) This becomes "[2-2]3D Setting" during 3D signal input.
Items
HDMI
COMP.
Color Space
Y Pb/Cb Pr/Cr
RGB
Picture Position
Horiz.
Vert.
Aspect (Video)
4:3
16:9
Zoom
Aspect (PC)
Auto
1:1
Full
Mask
52
Operation
(*)
Picture Adjust
Custom Gamma
>>
Custom1
Custom2
Custom3
Exit
MENU
Select
Explanation, operation, precautions, settings
It is possible to set this if one selects the HDMI terminal to the submenu "[2-1] HDMI".
(*) This can be set when the HDMI terminal is selected.
It configures the input signal method of the component input terminal.
Settings: Y Pb/Cb Pr/Cr, RGB
It is set for the component video image input signal.
It is set for the RGB video image input signal.
Please adjust if the edges of the picture are partially missing due to the timing of
horizontal and vertical synchronization signals. The value of the picture position depends
on the input signal.
(*) Depending on the input signal, it may be the case that not everything of the video
image is displayed.
(*) When there is a 3D input signal, adjustment is not possible.
This aligns the horizontal direction of the image position.
This aligns the vertical positions of the image.
(*) It is displayed when there is a video signal input.
(*) If set to3D, ratio is fixed to 16:9.
Settings: 4:3, 16:9, Zoom
Sets the screen size of the image to 4:3. For HD signals, left and right sides are reduced.
Sets the screen size of the video image screen to 16:9. For SD signals left and right sides
are expanded.
Zooms the video images. (*) For HD signals, this cannot be selected.
Sets the video image screen size when there is a PC video signal input.
(*) Is displayed when there is a PC signal input.
Settings: Auto, 1:1, Full
Positions the video image screen in the center of the display range, to fill the screen.
Depending on the size of the video screen, left and right black borders will be drawn.
The video image screen size is displayed with the size of the input image.
Depending on the input video image, the screen will become smaller or part of the input
image off the screen is cut off.
It does not keep the aspect ratio of the video image screen and fills the entire screen.
It hides the upper, lower, left and right borders of the screen with a black mask. Can be
individually adjusted vertically and horizontally. Please adjust to your preference.
(*) When there is a 3D input signal, adjustment is not possible.
Settings: Off, 2.5%, 5%, Custom
Correction Value
Normal
1023
White
Red
Green
Blue
512
Reset
0
50
Operate Back
BACK
Gamma curve
Gradation diagram
corresponding
100(%)
to the gamma
curve.
HDMI
COMP.
Picture Position
Aspect(Video)
16:9
Mask
Off
Progressive
Auto
3D Setting
[Y Pb/Cb Pr/Cr]
[16:9]
[Auto]
[Off]