How To Insert Batteries Into The Remote Control - JVC DLA-RS4800 Instructions Manual

1
Controls and features (continued)
Remote Control
■
To turn off the power
This button sequentially switches
3D formats (Reference page: 54)
(*) This function cannot be used
when inputting 2D and frame
packing 3D signals
Display the 3D setting menu
(Reference page: 54)
Use this function to sequentially
select focus, zoom and shift
adjustment lens controls.
(Reference page: 56)
To hide the image temporarily
(Reference page: 41)
To display/close the menu
(Reference page: 45)
This sequentially switches
between users 1-5.
To adjust color temperature
To set gamma

How to insert batteries into the remote control

①
If the remote control has to be brought closer to the projector to operate, it means that the batteries are
●
wearing out.
When this happens, replace the batteries. Insert the batteries according to the
● Be sure to insert the
● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the
batteries again and operate the remote control.
18
Getting started
STAND BY
HDMI 1
3D
FORMAT
LENS.
CONTROL
HIDE
MENU
FILM
NATURAL
USER
GAMMA
②
end first.
X7
ON
To turn on the power
INPUT
To select input mode
(Reference page: 32)
HDMI 2 COMP .
This sequentially switches anamorphic
modes. (Reference page: 55)
3D
ANAMO.
SETTING
This sequentially switches the call up/
save/edit modes of your lens memory
(Reference page: 56)
LENS
To adjust Lens Aperture
LENS AP.
MEMORY
(Reference page: 50)
To illuminate buttons on the remote
LIGHT
control for 7 second
To select or confirm
To return to the previous menu
BACK
(Reference page: 45)
PICTURE MODE
CINEMA ANIME
To switch picture mode
STAGE 3D
Display the information menu
INFO C.M.D.
(Reference page: 60)
Color Space
COLOR COLOR PIC.
TEMP ADJ.
SPACE
Sequentially switched picture
adjust items, such as contrast and
brightness.The switching items are
not the same for different models, or
different picture modes.
③
marks.