Table of Contents
Advertisement
v Use TrackPoint
When this scrolling method is selected, you can scroll with the TrackPoint
stick.
Adjusting mouse properties in Windows 95, Windows 98,
Windows 2000, or Windows Me
To adjust button configuration, double-click speed, pointer speed, or pointer
trails in Windows 95, Windows 98, Windows 2000, or Windows Me:
1. Click Start.
2. Select Settings, then click Control Panel.
3. Double-click the Mouse icon (Mouse Properties).
Note: After you make changes in any window in Mouse Properties in
Windows 95, Windows 98, Windows 2000, or Windows Me, be sure to
click OK or Apply to activate your changes.
If you are using OS/2 or Windows 3.1, consult your operating system user's
guide for instructions on adjusting mouse properties.
Using the embedded numeric keypad
You can activate the numeric characters shown on the front of the keys on the
right side of the keyboard by pressing the Shift key and the Nm Lk (Num
Lock)/Sc Lk (Scroll Lock) key at the same time.
You might want to change the default Num Lock setting to off at computer
startup. To change the Num Lock default on most Netfinity
1. Press F1 during computer startup.
2. From the Main menu, select Boot Options.
3. Turn Num Lock off.
Other IBM computer systems use similar procedures for changing defaults at
startup. For more information on changing defaults, refer to the documentation
that comes with your computer.
Using the TrackPoint USB Keyboard with Hub
®
servers:
2-7
Hide quick links:
Advertisement
Table of Contents
