Aube Technologies TH404 Owner's Manual page 17

Setup menu (2/2)
1
Away temperature
Set the temperature you wish to use when the thermostat is in Away mode (see page 10).
2
Daylight Saving Time
When the Daylight Saving Time function is enabled (On), the thermostat automatically switches to Daylight
Saving Time on the second Sunday of March and to normal time on the first Sunday of November.
3
Early Start
Early Start is used in Automatic mode only. When Early Start is enabled (On), the thermostat determines
when to start heating so the desired temperature is attained at the beginning of Wake and Return periods.
When Early Start is disabled (Off), heating starts only at the beginning of Wake and Return periods; thus
there is a delay before you reach the desired temperature.
4
Minimum and maximum setpoints
These parameters are used to modify the setpoint range and are applicable in all operating modes.
5
Keypad Lock
When keypad lock is enabled (On), no other setting change is permitted on the thermostat. The message
Lock appears when you try to change any other setting.
15
TH404