Wash Cycles And Options; Table Of Programmes And Wash Cycles; Wash Options - Hotpoint WMEF 722 Instructions For Use Manual

Wash cycles and options

Table of programmes and wash cycles

Description of the wash cycle
CLEAN Plus
1 Anti Stain
2 Whites
3 Cottons (4): extremely soiled whites.
4 Cottons (1): heavily soiled whites and resistant colours.
5 Cottons (2-3): lightly soiled resistant colours.
6 Synthetics: heavily soiled resistant colours.
6 Synthetics (5): heavily soiled resistant colours.
SPECIALS
7 Anti Allergy
8 Baby
9 Wool: for wool, cashmere, etc.
10 Delicates
Fastwash 60': to refresh normal soiled garments quickly (not
11
suitable for wool, silk and clothes which require washing by hand).
ECO CYCLES
12 Cottons
13 Synthetics
14 Fast 30'
Partials cycles
Rinse
Spin+Pump out
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle 4 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with regulation 2010/1061: set wash cycle 5 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 40°C. The actual washing temperature may differ from the indicated value.
3) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.
4) Short wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.
5) Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C.

Wash options

Timer Saver
If you select this option, the wash cycle duration will be
reduced by up to 50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy saving.
Use this cycle for lightly soiled garments.
! It cannot be used in conjunction with wash cycles 1, 2, 7,
8, 9, 10, 11, 12, 13, 14, , .
Detergents
Max. Max.
temp. speed
(°C) (rpm)
Fabric
Wash
softener
40° 1200
 
60° 1200
 
90° 1200
 
60° 1200
 
40° 1200
 
60° 800
 
40° 800  
60° 1200
 
40° 1000
 
40° 800  
30° 0
 
60° 1200
 
Cold
1200  
Water
Cold
800
 
Water
Cold
800
 
Water
- 1200 -

- 1200 - -
4 - - - 180'
4 - - - 180'
7 53 2,16 72 160'
7 53 1,10 58 192'
7 53 0,99 82 183'
3 44 0,93 47 110'
3 44 0,57 46 95'
4 - - - 195'
4
- - - 145'
1,5
- - - 70'
1 - - - 80'
3.5 - - - 60'
3 53 0,17 63 80
3 48 0,07 30 60'
3 71 0,04 34 30'
7 - - - 36'
7
- - - 16'
GB
9