Advertisement
G e t s t a r t e d
Charge the battery
1. Plug the charger into its connector on the GPS
module. See GPS module parts on page 12.
2. Connect the charger to a power outlet. During
charging, the green or red indicator light blinks,
depending on whether the GPS module is on (green)
or off (red).
3. When the battery is fully charged and the power is on,
the green light is displayed continuously. When the
battery is fully charged and the power is off, the red
light stops blinking. Disconnect the charger from the
power outlet and the GPS module.
When the battery is running out of power, the red
indicator light on the GPS module starts blinking every 15
seconds. Recharge the battery.
16
Advertisement
Chapters
