If there is any doubt, do not attempt to use this equipment. USE EYE PROTECTION. Wear ANSI approved safety impact eye glasses when assembling this Canopy. ANSI approved safety impact eye glasses are available from Harbor Freight Tools. SKU 45211 PAGE 2...
When unpacking, check to make sure all parts shown on the Parts List (page 6) are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
The eight Turnbuckles (part #11) are used to strengthen the frame assembly. Attach the Turnbuckles to the frame assembly and tighten, using a pair of pliers. NOTE: Do not over tighten the Turnbuckles, as bending to the frame assembly will occur. (See Figure B.) FIGURE B SKU 45211 PAGE 4...
Secure the Metal Bases (part #12) to the ground, using the T-Stakes (part #13, not shown). INSPECTION, MAINTENANCE, AND CLEANING Before each use, examine the general condition of the Canopy. Inspect the Canopy for damage. Check for loose parts, misalignment, broken parts, tears in the tarp, SKU 45211 PAGE 5...
4-Way Center Piece NOTE: Tarp Tie Some parts are listed and shown Turnbuckle for illustration purposes only, and Metal Base (Not Shown) are not available individually as T-Stake (Not shown) replacement parts. Tarp (20’ x 20’) SKU 45211 PAGE 6...
Need help?
Do you have a question about the 45211 and is the answer not in the manual?
Questions and answers