Restore Factory Defaults - XiNCOM X16-R User Manual

•
Device
Statistics
•
•
•
•
Buttons
•
•

Restore Factory Defaults

When the "Restore Factory Defaults" button on the Status screen above is clicked, the following
screen is displayed:
If the "Restore" button on this screen is clicked:
•
ALL of your settings will be erased.
•
The default IP address, password and all other settings will be restored to the factory default
values.
•
The DCHP server function will be enabled.
These changes may mean that the current connection is invalid and you will have to re-connect to
the MULTI-WAN GATEWAY using its default IP address (192.168.1.1).
System UpTime – The time since the device system was last reinitialized.
CPU Usage – The current CPU percentage usage.
Memory Heap – The current Memory percentage usage (Heap & Queue).
Packet Queue – The current Packet Queue percentage usage.
Refresh – Updates the on-screen data.
Restart – Restarts (reboots) the MULTI-WAN GATEWAY.
Restore Factory Defaults – This will delete all existing settings and restore
the factory default settings. See below for details.
Figure 8-2: Restore Factory Defaults
Page 67