Session Limit - XiNCOM X16-R User Manual

Session Limit

This new feature allows to drop the new sessions from both WAN and LAN side, if the number of
new sessions exceeds the maximum value set by you in the Sampling Time field.
Settings – Session Limit
Sampling Time
Maximum of Total New
session
Maximum of New
Sessions for Host
Maximum of Dropped
New Sessions for Host
Pause Time for Host
while exceeding limit
on Dropped New
Sessions
Figure 5-3: Session Limit
The time interval specified by you for new sessions. Only the new
sessions that have recently occurred are counted according to the
sampling time entered. (Default is 400 mil-sec)
The maximum total number of new sessions in the system which is
acceptable in the sampling time. Any new incoming sessions will be
dropped after the number of new sessions has been exceeded.
(Default: 65535 session/sec)
The maximum number of new sessions from the host which is
acceptable in the sampling time. Any new incoming sessions will be
dropped from this host after the number of new sessions has been
exceeded. (Default: 100 session/sec)
If the number of dropped new sessions from the host exceeds the
Maximum in the sampling time, any new session from the host will be
dropped in the pause time period. (Default: 25 session/sec)
Within the pause time period, new session from the suspended host will
not be served by the system when the number of dropped new
sessions exceeds the defined Maximum. (Default is 5 minutes)
Page 52