Install Batteries - Radio Shack 6300772 User Manual

Install Batteries

1. Insert two AAA batteries (not included) into the sensor
and two AAA batteries (not included) into the weather
forecaster, matching the polarity symbols (+ and –) marked
inside each battery compartment.
2. Press RESET on both units.
RESET
Battery Notes:
• Reset your forecaster after
replacing the batteries or if the system malfunctions. When you
press RESET, all settings will return to default value, and all stored
information will be lost.
• When the low battery icon
the batteries.
• Use alkaline batteries for longer usage, or use lithium batteries in
temperatures below –4°F (–20°C).
• Dispose of batteries promptly and properly. Do not burn or bury
batteries.
• Use only fresh batteries of the required size and recommended
type.
• Do not mix old and new batteries, different types of batteries
(standard, alkaline, or rechargeable), or rechargeable batteries of
different capacities.
• If you do not plan to use the forecaster for a month or more,
remove the batteries from the weather forecaster and the sensor.
Batteries can leak chemicals that can destroy electronic parts.
appears or the display dims, replace
3
TX
RESET
CHANNEL
1 2 3