F1 electronica DELTA Instalation And User Manual page 2

!
hood is open, the indicator lights might not
THE PROPER OPERATION OF THE
!
CHANGE-OVER SWITCH DEPENDS ON
FOLLOWING THE ABOVE-MENTIONED
2
ENGLISH
Make sure the electrical installation is far
from high voltage cables. SPARK
CABLES MUST BE FACTORY
ORIGINALS OR OF SIMILAR QUALITY.
Make sure electrical installations are
welded and properly isolated.
NEVER thread the pressure gauge using
your hand. Use a 14mm-fix wrench.
Direct sunlight on the pressure gauge
affects its operation. For example, if the
turn on.
INSTRUCTIONS.
NOTES
ENGLISH
11