Nearby Devices; Allshare Cast - Samsung Galaxy Tab 10.1 User Manual

Nearby devices

Share files with nearby DLNA certified devices over Wi-Fi.
(For information on configuring Nearby devices, see "Nearby
devices" on page 181.)
Note: To use Nearby devices for sharing, you must have set up
a connection with another Wi-Fi device that supports
DLNA.
1. Connect your phone and another DLNA certified device
to the same Wi-Fi network. (For more information, refer
to "Wi-Fi" on page 120.)
2. From a Home screen, touch
Settings. The Settings screen appears.
3. Under Wireless and network, touch More settings
Nearby devices. The Nearby devices screen appears.
4. Touch File sharing to enable or disagle file sharing via
DLNA. When enabled, a check mark appears in the
check box.
Apps

AllShare Cast

AllShare Cast lets your phone share the contents of its
display with other Digital Living Network Alliance (DLNA)
certified devices, such as Smart televisions.
Note: To view more information about DLNA certified products
visit http://www.dlna.org/home.
1. Connect your phone and another DLNA certified device
to the same Wi-Fi network. (For more information, refer
to "Wi-Fi" on page 120.)
2. From a Home screen, touch
Settings. The Settings screen appears.
3. Under Wireless and network, touch More settings . The
Wireless and networks screen appears.
4. Touch AllShare Cast. The AllShare Cast screen appears
with AllShare Cast already active and begins scanning
for available devices. All detected DLNA certified
devices are listed under Available devices.
5. Touch the desired device to establish a connection. You
can now view the contents of your phone's display on
the connected device.
Apps
Connections 129