TP-Link TD-8816 Quick Installation Manual

Quick Installation Guide

ADSL2+ Modem Router
Please select your preferred setup wizard.
CD Setup Wizard
For Windows users only
Web-based Quick Setup Wizard
For Mac OS/Linux/Windows users who are
unable to run the Resource CD
TD-8816/TD-8817
MODEL NO.

Package Contents

The product model shown in this QIG is TD-8817, as an example.
TD-8817 Power Adapter
Ethernet Cable ADSL Splitter
ADSL2+ Modem Router
Please select your preferred setup wizard.
CD Setup Wizard
For Windows users only
Web-based Quick Setup Wizard
For Mac OS/Linux/Windows users who are
unable to run the Resource CD
MODEL NO. TD-8816/TD-8817
QIG
USB Cable (For TD-8817 only)
Necessary Information
For a smoother setup, we suggest that you consult your ISP rst
and ask for the following information . This information will be
required during the con guration stage.
VPI/VCI: Connection Type:
Encapsulation Type (Optional):
7106504342 REV2.0.0
CD Setup Wizard
1 Insert the TP-LINK Resource CD into the CD-ROM drive.
Select TD-8817 and click Start Setup.
2
For the advanced con gurations, please refer to the User Guide on the Resource CD provided. You can also log on to www.tp-link.com -> select
your region -> search for the product -> User Guide can be found under the "Download" tab on the product page.
Web-based Quick Setup Wizard
Hardware connection.
1
Resource CD
Computer
Phone Cable x 2
2
Step 1: Connect your devices step by step following the gure.
Step 2: Power on all your devices and then check the LEDs
(especially the ADSL LED).
Name
Power)
(ADSL)
(LAN)
( For Windows users only )
Wall Socket
Phone Cable
PHONE MODEM
ADSL
3
1
Phone Cable
Ethernet Cable
Status Indication
The modem router is powered on.
On
ADSL line is synchronized and ready
On
to use.
Flash ADSL negotiation is in progress.
There is a device conneted to this LAN
On
port.
The modem router is sending or receiving
Flash
data over this LAN port.
Then a ash video will pop up and show you how to connect
3
your devices. When you nish the hardware connection, click
to continue.
The Easy Setup Assistant will start. Please check to see if the
4
LEDs (especially the ADSL LED) of your modem router display
normally as the chart describes. Then click NEXT, and follow the
step-by-step instruction until you complete the con guration.
( For Mac OS/Linux/Windows users who are unable to run the
Resource CD )
Open your browser and type http://192.168.1.1 in the address
2
eld. Then use the default user name admin and password
admin to log in.
Splitter
If you are unable to access 192.168.1.1, please refer to T3
in Troubleshooting.
Click Quick Start in the main menu and click RUN WIZARD, the
3
next screen will appear, and then click NEXT.