Physical Description; Front Panel - D-Link DVS-104 User Manual

Physical Description

Front Panel

Status LED's
pattern and follow the trouble-shooting procedures. If the system still cannot operate
normally, please contact your reseller for technical service.
Network Interface
Ethernet
PPP with modem
PPP with null modem
DVS-104 User Manual v1.00
Building Networks for People
Each time Video
power-on-self-test, abbreviated as POST, to examine every
hardware module. As soon as the administrator plugs in the
power connector both LED's under the power LED will flash one
by one until the diagnosis is done. If the result is good, both
status LED's will turn off for a while and then follows the pattern
below. If any module fails, refer to the Appendix A for the error
Condition
before IP installed
after IP installed
during camera control
after POST
during camera control
before connected
after connected
during camera control
Server starts
LED1 (Heartbeat) LED2 (Status)
OFF
Blink
Blink
Blink
Blink
ON
Blink
Blink
- 7 -
up, it will perform
OFF
OFF
Blink
ON
Blink
ON
ON
Blink