Table of Contents
Advertisement
Building Networks for People
Set digital outputs
To set digital output 1 to connect NO with COMMON, type "DO1=O".
To set digital output 1 to connect NC with COMMON, type "DO1=C".
To set digital output 2 to connect NO with COMMON, type "DO2=O".
To set digital output 2 to connect NC with COMMON, type "DO2=C".
Erase snapshots stored in Flash memory
Typing "erase image" will clear all snapshots saved in Flash memory.
Erase logo and graphic buttons
Typing "erase graph" will clear all images used on the homepage. If no new images are
uploaded, the system will switch to text mode and use default images instead.
Skip installation at next boot
Typing "lock" will inform Video Server to fix current network settings. It need not wait for
installation during the next boot.
Reset network for new settings
Typing "unlock" will make Video Server give up current settings and wait for installation.
Restore factory default settings
Typing "clear" will make Video Server restore factory settings but not restart. To validate
new settings, type "reset" to make the system restart.
Reset system
Typing "reset" will make Video Server perform a software reset.
DVS-104 User Manual v1.00
- 71 -
Advertisement
Table of Contents
