Download Print this page

JBL PRV170 Owner's Manual

Watertight stereo receiver built for the outdoors
Hide thumbs Also See for PRV170:

Advertisement

Quick Links

Model Name: JBL-PRV170
Watertight Stereo Receiver built for the Outdoors
With Built In Bluetooth Audio Streaming, AM/FM, USB input, Auxiliary Input, RF
remote option, and 2 pairs of pre-outs.
Product Description:
This radio features state of the art Bluetooth technology allowing music to
wirelessly stream from an audio source to the receiver you just purchased. Why
Bluetooth? From a practical standpoint, Bluetooth enables your music device (if
applicable) to be placed in a glove box, your overhead console, or even your
pocket-places that are dry-without having to install a separate docking station.
In addition, Bluetooth audio streaming will work with any Bluetooth enabled
device, not just one brand of media. Once connected, you can use your marine
receiver to control your media device and vice versa!
The JBL PRV170 incorporates the following features:
AM/FM
v
Bluetooth Audio Streaming
v
USB input for USB Drive Playback
v
Auxiliary input
v
Waterproof faceplate
v
45W X 4 amplifier
v
RF Remote Ready (remote purchased separately)
v
Owner's Manual

Advertisement

loading

Summary of Contents for JBL PRV170

  • Page 1 In addition, Bluetooth audio streaming will work with any Bluetooth enabled device, not just one brand of media. Once connected, you can use your marine receiver to control your media device and vice versa! The JBL PRV170 incorporates the following features: AM/FM v...
  • Page 2 • Once the unit is on, a quick press will MUTE the stereo. • Once the unit is on, a long hold (pressing down for 2 seconds) of the JBL • button will turn the unit off. In radio mode, pressing this results in switching between radio bands ie FM1, FM2, FM3, AM1, AM2.
  • Page 3 A Short press of the MODE button switches amongst Radio, USB, Bluetooth, Aux. Note: Mode USB will not show up unless a USB drive is inserted. While in Radio mode, a long press followed by an immediate short press switches amongst BAS,TRE,BAL,FAD, LOUD on/off, US/European frequency, BEEP on/off, 12/24 hours via short press consistently.
  • Page 4 C. Long press the MODE/SEL button again till “BT PAIRING” displays. D. Pick the “JBL PRV-170” option on your Bluetooth enabled device (please note that if you are prompted for a password , the code entered will be “0000” (zero).
  • Page 5 B. To set the clock, the following must be completed. Long press the button, following this with another long press of button. In doing so, the hour will flash-press VOL+/VOL- to change the hour. Another short press of the button will cause the minute to flash, press VOL+/VOL- to change the minute.
  • Page 6 . Wiring...
  • Page 7 . Troubleshooting A. If the unit does not power up, consider the following tips. 1. Incorrect wiring Solution: Double check wiring making sure connections are firm. 2. Fuse is blown Solution: Replace fuse 3. Voltage source is not sufficient Solution: Voltage must be between 11-13.6 Volts. B.