Introduction Thank you for purchasing a JBL MA series AV Receiver. For over 75 years, JBL has been creating best in class audio equipment for concerts, studios, theaters, and homes around the world. JBL is the trusted choice of leading recording artists and sound engineers.
When you use surround-channel speakers in a 7.1-channel system, place the side surround side speakers directly to the sides of the listening position. Ideally, they should be 5-6 feet (1.5m-1.8m) above the floor. MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 10 of 45...
Cat 5e or Cat 6 cable. For a Wi-Fi Connection: To make a Wi-Fi connection, download the JBL PREMIUM AUDIO app to your smartphone or tablet. Links are on the front page of this manual. Connect the supplied external antennas for Bluetooth/Wireless connectivity to connectors on the rear panel.
Pairing Mode. • To pair your Bluetooth source device, open the Bluetooth settings on your source device and scan for MA7100HP/MA9100HP ###### from the list. Each product has a unique ID. 1. Rotate Input Carousel Rotate to Control Volume Push to Mute/Unmute 2.
Provides a digital audio input connection using a fiber-optical cable with TOSLINK connectors. This can be used to receive digital audio from a TV that is not compatible with ARC/eARC or HDMI incompatible devices such as a CD transport. MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 13 of 45...
Page 14
Note: The ground terminal (GND) of this unit is not for safety grounding purposes. Depending on the turntable, connecting the ground line to this terminal may reduce a significant amount of noise. MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 14 of 45...
Before making any output connections, ensure the power cord is disconnected from the amplifier and carefully review the total impedance for loudspeakers connected to each amplifier output. JBL recommends using two-conductor or four-conductor, heavy gauge speaker wire up to 12 AWG. Speaker outputs provide connection to passive loudspeakers via binding post-type connectors that accept bare wire, spade or banana plug terminations.
The Receiver is supplied with an AC plug already attached to the cord. Check that the plug supplied fits your outlet – should you require a new power cord, please contact your JBL dealer. Push the IEC plug end of the power cord into the socket on the back of the amplifier, making sure that it is pushed in firmly.
‘Setup’ menu. This ensures that the sounds from the various speakers arrive at the listening position at the correct time to recreate a realistic surround effect. The distance can be entered in inches, centimeters, or milliseconds. MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 20 of 45...
The Receiver front panel controls can be used to configure the unit. Follow the instructions for using the remote control, in this case using the Input rotary knob for up, down, left and right. Press the Input button to select. MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 21 of 45...
Dialog Enhance – A proprietary JBL audio enhancement setting to improve the intelligibility of spoken dialog for cinema applications using a center channel. Note: if you are not using a center channel speaker, this setting will have no effect.
Page 25
When Party is selected for either the Line Out or Rear Configuration Amp Assignment, you will have the option to enter the Party Mode settings from the Main Menu as shown below, which provides an independent volume control. MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 25 of 45...
Page 27
⃞ Status – Adjust when the LED underglow is active: Boot Up / Always On / Always Off ⃞ Color – Customize the color of the LED underglow. Available colors include: JBL Orange | Yellow | Green | Blue | Purple | Red ⃞ Dim -...
USB Update – Used for updating the firmware via USB. The firmware in your Receiver can be updated from a USB flash drive containing a firmware update file. A manual software update should not be performed unless instructed by JBL Customer Support.
Dolby Atmos, DTS:X, and DTS-HD are high-resolution immersive surround formats which use object-oriented audio technology to deliver additional sonic locations for the sound requiring additional speakers including height speakers. MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 29 of 45...
Using a microphone to analyze the audio system and room, EZ Set EQ builds an acoustic model of the listening environment. The built-in microphone of an iOS device can be used for the calibration. For Android users, JBL recommends using a third-party microphone for the best results since every Android device has different a microphone/frequency response.
CALIBRATING THE SYSTEM WITH EZ SET EQ The EZ Set EQ app will automatically try to establish a connection with the AVR. Connectivity between the mobile device and the JBL MA Series AV Receiver models are as follows: Bluetooth Network Audio...
However it may be difficult to do this in a home environment, so Room EQ is your next best choice. MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 38 of 45...
Note: The device is restricted to indoor use when operated in the 5150-5350Mhz frequency range This equipment should be installed and operated with minimum distance 20cm between the radiator & your body MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 44 of 45...
Page 45
United registered States and other countries. Features, Specifications, and Appearance subject to change without notice. MA7100HP | MA9100HP Quick Start Guide | Rev 1.3 20240612 | Features, Specifications, and Appearance subject to change without notice. Pg 45 of 45...
Need help?
Do you have a question about the MA7100HP and is the answer not in the manual?
Questions and answers