Technical Reference; Memory Resources; Addressable Memory - Intel DN2800MT Technical Product Specification

2

Technical Reference

2.1

Memory Resources

2.1.1

Addressable Memory

The board utilizes 4 GB of addressable system memory. Typically the address space
that is allocated for PCI Conventional bus add-in cards, PCI Express configuration
space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM
(total system memory). On a system that has 4 GB of system memory installed, it is
not possible to use all of the installed memory due to system address space being
allocated for other system critical functions. These functions include the following:
BIOS/SPI Flash device (2 Mbit)
Local APIC (19 MB)
Direct Media Interface (40 MB)
PCI Express configuration space (256 MB)
PCH base address registers
PCI Express ports (up to 256 MB)
Memory-mapped I/O that is dynamically allocated for PCI Express add-in cards
(256 MB)
The board provides the capability to reclaim the physical memory overlapped by the
memory mapped I/O logical address space. The board remaps physical memory from
the top of usable DRAM boundary to the 4 GB boundary to an equivalent sized logical
address range located just above the 4 GB boundary. Figure 11 shows a schematic of
the system memory map. All installed system memory can be used when there is no
overlap of system addresses.
43