Removing The Monitor Pedestal Base - HP Compaq L1506x User Manual

Hide thumbs Also See for Compaq L1506x:

Table of Contents

Removing the Monitor Pedestal Base

You can remove the monitor panel from the pedestal base to install the panel on a wall, a swing arm,

or other mounting fixture.

CAUTION:

power and signal cables are both disconnected.

Disconnect and remove the signal and power cables from the back of the monitor.

Lay the monitor face down on a flat surface covered by a clean, dry cloth.

CAUTION:

before removing the base from the monitor.

Remove the stand cap (1) from the top of the pedestal pillar.

Remove the three screws that secure the pedestal base to the display head (2), then remove the

base from the monitor (3).

Figure 3-4

ENWW

Before beginning to disassemble the monitor, be sure the monitor is turned off and the

Ensure that the bottom of the monitor base is positioned over a table or desktop

Removing the Monitor Pedestal Base

Table of Contents