Global 246340 Operation Manual

Portable Ventilator Fan Operation Manual
Customer Service
1-800-645-2986

IMPORTANT SAFETY INFORMATION:

DANGER
• Do not submerge motor or expose motor to water.
• Never handle the fan or motor with wet hands or when
standing on wet or damp surface or in water.
WARNING
• Electric shock hazards - May cause severe personal injury
or death. For your safety, turn off electric power supply
before installing. Unplug unit before moving or servicing
your fan. Never make adjustments to the fan when power
is on.
• Do not remove the power supply cord, ground prong or
ground fault unit. Do not alter power cord. For your
personal safety, the fan must be grounded. Removal or
tampering of power cord will void warranty. Never use an
extension cord to connect the fan to an outlet. All
installations must be made into a grounded outlet. Unplug
the fan when not in use.
• To reduce the risk of fire or electrical shock, do not use this
fan with any solid state speed control device. This plug is
intended to fit an outlet only one way. If this does not fit
outlet, contact a qualified electrician. Do not attempt to
bypass this procedure.
• If the power supply cord is damaged, contact your local
service center or a qualified electrician to install an
appropriate replacement cord to prevent any injury
or damage.
CAUTION
• Read and follow all instructions before operating fan. Do not
use fan if any part is damaged.
• Appliance should not be used in locations where corrosive
or explosive atmosphere (dust, vapor or gas) exists.
• Never insert fingers or objects through the grill guard when
fan is in operation. Disconnect the fan when removing guard
for cleaning.
• Make sure the fan is on a stable, flat surface when
in operation.
• Do not use fan in windows. Rain may create an
electrical hazard.
8/5/10 2:40 PM Page 1
globalindustrial.com
Portable Ventilator Fan
Operation Manual

MAINTENANCE AND STORAGE

• To keep the fan clean, use a dry cloth to wipe the surface
• Do not clean the fan with a chemical solution as this may
• Never clean the fan in water.
• Fan should always be stored indoors.
FEATURES:
• Large capacity E-class motor.
• Specially designed axial propellers.
• High static pressure.
• High flow rate.
• Excellent strength.
Blade
Size" Model Dia.
(mm)
8 246340 200
12 246343 300
These Instructions
of the fan.
damage the coating and plastic parts.
Voltage Frequency Phase Poles Watts Flow Rate RPM Pressure
(V~) (Hz) (W)
120 60 1 2P 165
120 60 1 2P 430
Read and Save
Models
246340
246343
Static
CFM
1589 3300 480
2931 3300 520