Chevrolet TrailBlazer 2007 Owner's Manual page 488

7. Make sure the tire is stored securely. Push,
pull (A), and then try to turn (B) the tire.
If the tire moves, use the wheel wrench and
socket end of the extension to tighten the
cable.
8. Return the equipment to the proper location
in the vehicle as shown next.
488
A. Handle
B. Wheel Wrench
C. Instruction Label
1. Attach the handle (A), wheel wrench (B), and
extension (D) in the slots provided.
2. Roll up the instruction label (C) and return to
the slot in the tool kit.
3. Assemble the wheel blocks (F) to the jack.
4. Turn the knob (E) on the jack clockwise
to raise the jack head.
5. Return the rear seat to its proper position.
D. Extension(s)
E. Knob
F. Wheel Blocks and Jack