Hardware Installation
a. Product location: You can install the product on the holder and hang it on the wall
or ceiling. Please do not install this product in locations of poor ventilation. This
will result in poor operation.
b. If you have an RS-485 rotary stage, please connect this product to the stage from
the RS-485 port. Please make sure the poles must be correctly connected.
c.
1. Connecting to LAN
Please connect the camera to your network with a LAN cable from the LAN
Socket.
2. Connect to the power source
Plug one end of the attached power cable in the power socket of the product and
connect the other end to the AC power source.
Note: After connecting the product a power supply, you can check if it is on from the Status LED
on the front.
8
Mail:
info@visionxip.com
Web:
www.visionxip.com