Table of Contents
Advertisement
Camera Setting from a Router
You can use DHCP when you want to use the camera on the Intranet (LAN). However,
the IP must fixed when you want to use the camera on a WAN. For this application, it
is required to set up a virtual server on the ADSL router. Follow the steps below to
complete the setting:
1. Enter the camera setting page to set a fixed IP. (Refer to the "Network Setting".)
Ex.: 192.168.0.49
2. Enter the ADSL router main setting page. Ex.: Zonet ADSL router
3. Enter the Virtual Server setting page.
a. Set "mapping of HTTP Port (80) to 192.168.0.49 ".
b. Restart ADSL router.
After completing the settings, you can operate the camera from a WAN IP Address
via the ADSL router.
Example: The Virtual Server setting screen of the Zonet ADSL router
Note: The virtual server of setting screen is not the same for all ADSL routers. Refer to the manual of
the ADSL router you purchased for more information about the setting.
11
Mail:
info@visionxip.com
Web:
www.visionxip.com
Advertisement
Table of Contents
