Terms Of Use; Care And Maintenance - Energer ENB466PLN Safety And Operating Manual

TERMS OF USE

When all precautions have been taken and the previous operations were done, you can start working.
Always start the planer before putting it in contact with the workpiece and stop it completely before put it
down.Always secure the workpiece.
The stress on the machine should not be such that the speed is reduced by more than 25% for significant
periods.
When overloaded happened, run the machine empty for 3 to 5 minutes to cool the engine.

CARE AND MAINTENANCE

Keep the ventilation openings clear and clean the product regularly. This machine requires no special
mechanical maintenance such as greasing the bearings.
If something unusual occurs during use, switch off the supply and disconnect the plug. Inspect and repair the
tool before using it again. The repairs must be carried out by a qualified technician.
Repair of the tool must only be carried out by a qualified repair technician.
Repair or maintenance by unqualified personnel can lead to a risk of injury.
Use only identical spare parts for repairing a tool.
Caution!
If the supply cord of this power tool is damaged, it must be replaced by a specially prepared cord available
through the service organization.
Care and cleaning
Cleaning of plastic parts is disconnected machines, using a soft damp cloth and a mild soap.
Never immerse the machine and do not use detergent, alcohol, petrol, etc..
In case of problems or for a deep cleaning, consult the manufacturer, its service agent or a similarly qualified
person to avoid a hazard.
STORING
Store the machine, operating instructions and where necessary the accessories in the original packaging. In
this way you will always have all the information and parts ready to hand.
Pack the device well or use the original packaging in order to avoid transit damage.
Always keep the machine in dry place.
710W PLANER ENB466PLN